How To Repair Leak In Showerhead Pipe
Introduction
Water is leaking at the connection between the shower head and the pipe? No trouble! Here are some simple steps to set up it!
-
-
Employ a ruler to mensurate about 8" long on the teflon tape. And so use a pair of scissors to cut it.
-
-
-
Identify the wrench on the shower caput mountain. Adjust the wrench to fit tightly on the mountain.
-
Turn the wrench counter-clockwise to loosen the showerhead, so unscrew it the residual of the manner by manus to remove it.
-
-
-
Place and hold ane end of the tape on the threads at the finish of the shower arm (the piping coming out of the wall).
-
While taking care to keep the record apartment, wrap it clockwise around the threads, completely roofing them and wrapping back over itself to stick.
-
-
-
Thread the showerhead back onto the shower arm.
-
Spin it on a few times to get information technology manus tight.
-
-
-
Test out the showerhead with your hand tightening offset. If it still leaks, y'all may need to wrench on information technology a scrap to seal things up.
-
-
-
The tape is replaced! However this may not accept solved your problem. If the showerhead nonetheless leaks from the joint with the shower arm, in that location may be clay or droppings in the joint, or damaged threads on the shower arm.
-
Try tightening the showerhead a petty more with your wrench, or reapplying teflon tape to ensure a good layer.
-
Determination
This guide is made to maintain the tightened connection between the shower caput and the pipage. If the shower head is leaking water elsewhere except at the connection, please seek for other fixing guides for repairing shower caput leaking problem.
Embed this guide
Choose a size and re-create the code below to embed this guide as a minor widget on your site / forum.
Preview
Source: https://www.ifixit.com/Guide/How+to+Fix+a+Leaking+Shower+Head/37939
Posted by: burkhardtinizing.blogspot.com
0 Response to "How To Repair Leak In Showerhead Pipe"
Post a Comment